1995 Land Rover Discovery Workshop Manual

19
FUEL SYSTEM
KNOCK SENSOR
Service repair no - 18.30.28 - Sensor - LH
Service repair no - 18.30.30 - Sensor - RH
CAUTION: Due to the sensitivity of the
sensors, do not apply tape or sealant to
sensor threads.
Remove
1.
Raise vehicle on ramp.
5.
6.
Both sensors:
Disconnect sensor multiplug.
Remove sensor.
Refit
7.
8.
9.
Clean sensor and mating face.
Fit sensor.  Tighten to 16 Nm.
Connect sensor multiplug.
RH Sensor only: Manoeuvre heatshield into
position.
10.
11.
12.
Secure clip to solenoid.
Align bracket to mounting and fit bolt. Fit and
tighten bolt.
13.
Lower ramp.
CAUTION: Failure to tighten sensor to
correct torque will result in malfunction or
sensor damage.
2.
RH Sensor only: Remove bolt securing starter
motor heatshield to RH engine mounting.
Release heatshield clip from starter solenoid.
Move heatshield aside for access to knock
sensor.
3.
4.
10
REPAIR
Product Specification
CategoriesLand Rover Discovery, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 873 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDiscovery
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field