INTRODUCTION
JACKING
Vehicle jack
The following instructions must be carried out before
raising the vehicle off the ground.
The jack provided with the vehicle is only intended to
be used in an emergency, for changing a tyre. Do
NOT use the jack for any other purpose. Refer to
Owner’s Manual for vehicle jack location points and
procedure. Never work under a vehicle supported by
the vehicle jack.
1.
2.
3.
4.
Use a solid level ground surface.
Apply parking brake.
Select ’P’ or 1st gear in main gearbox.
Select Low range in transfer gearbox.
Hydraulic jack
CAUTION: To avoid damage occurring to
the under body components of the vehicle
the following jacking procedures must be
A hydraulic jack with a minimum 1500 kg, 3,300 lbs
load capacity must be used.
adhered to.
CAUTION: Do not commence work on the
underside of the vehicle until suitable axle
stands have been positioned under the
axle.
DO NOT POSITION JACKS OR AXLE STANDS
UNDER THE FOLLOWING COMPONENTS.
Body structure
Bumpers
Raise the front of the vehicle
Fuel lines
Brake lines
1. Position cup of hydraulic arm under differential
Front radius arms
Panhard rod
casing.
Steering linkage
Rear Trailing links
Fuel tank
Engine sump
Gearbox bell housing
NOTE: The differential casing is not
central to the axle. Care should be taken
when raising the front road wheels off the
ground as the rear axle has less sway stiffness.
Jack or support vehicle by axles only.
INFORMATION
5
| Categories | Land Rover Discovery, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)