1995 Land Rover Discovery Workshop Manual

CHASSIS AND BODY
8.
Disengage the lifting arm stud from the upper
lifting channel, manoeuvre the window regulator
and remove it from the lower centre opening in
the inner door panel.
9.
Remove the exterior driving mirror. See
ELECTRICAL, Repair,  exterior driving
mirrors.
Remove the waist rail seal from the top of the
door panel.
Remove the ’Torx’ bolt from the hinge face of the
door which secures the front of the door frame.
Remove the bolt and plain washer from the
opening edge of the door which secures the rear
of the door frame.
14.
15.
Remove the screws and plain washers, from
inside the door, securing the bottom of the front
and rear glass channels.
Lift the door glass frame complete with glass out
of the door panel and remove to a suitable
bench.
Remove the adhesive tape securing the glass to
the door frame.
Slide the glass out of the door frame channel.
10.
11.
12.
16.
17.
13.
Remove the bolt and plain washer from the
recessed hole in the front of the inner door panel
under the exterior driving mirror mounting plate.
Refit
NOTE: When refitting the door glass
frame, ensure it is repositioned to suit the
door opening before fully tightening the
door frame securing bolts.
18.
Reverse removal procedure.
REPAIR
3
Product Specification
CategoriesLand Rover Discovery, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 873 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDiscovery
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field