1995 Land Rover Discovery Workshop Manual

MFI
6.
7.
8.
9.
Remove access panel from floor.
Disconnect multi-plug from fuel sender unit.
Disconnect two fuel line unions from fuel pump.
Using service tool no. LRT-19-001, remove
pump unit retaining ring. Withdraw unit from fuel
tank.
WARNING: A quantity of fuel will be
retained in body of unit, care must be
taken to prevent fuel spillage when unit is
removed.
Refit
10.
Insert fuel pump into tank. Fit retaining ring.
Tighten to 48 Nm.
11.
12.
13.
Connect fuel lines to pump.
Connect multi-plug to sender unit.
After assembly, check all fuel pipes, sealing
rings and hose connections are secure.
Run engine to check for fuel leaks.
Inspect access panel seal, fit a new seal if
necessary.
14.
15.
16.
17.
Fit access panel and tighten screws.
Reverse removal procedure. 4 - 5. Fit insulation
and carpet.
REPAIR
21
Product Specification
CategoriesLand Rover Discovery, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 873 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDiscovery
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field