1995 Land Rover Discovery Workshop Manual

CHASSIS AND BODY
REAR CENTRE SEAT BELT
Service repair no - 76.73.20
Remove
REAR FOLD DOWN SEAT BELTS
Service repair no - 76. 73.28
Remove
1.
Pull both halves of the seat belt through to the
rear of the seat.
1.  Remove the fold down seat or pocket side panel,
whichever is applicable.  See rear fold down
seats.
2.
Remove speaker by releasing screws and
disconnecting Lucars. Withdraw rear quarter trim
panel.
3.
4.
Remove the rear bodyside lower trim panel. See
rear compartment lower trim panels.
Remove the bolts securing the seat belt halves
to the body side.
2.
3.
Pull back the load space carpet to reveal the
Torx bolt heads.
Remove the Torx bolt and plain washer securing
the belt bracket to load space floor.
Remove belt complete with bracket.
Repeat steps 2 to 4 for other half of belt.
4.
5.
Refit
6.
7.
Reverse removal procedure.
Finally, tighten the seat belt bolts to 32 Nm (24
lbf ft)  .
Refit
5.
6.
Reverse removal procedure.
Finally, tighten the seat belt bolts to 32 Nm (24
lbf ft) .
REPAIR
31
Product Specification
CategoriesLand Rover Discovery, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 873 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDiscovery
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field