1995 Land Rover Discovery Workshop Manual

HEATING AND VENTILATION
HEATER BLOWER SWITCH AND ILLUMINATION
BULB
HEATER CONTROL UNIT
Service repair no - 80.10.42.
Remove
Service repair no - 80.10.22 - Switch
Service repair no - 86.48.73 - Bulb
Remove
1.  Disconnect battery negative lead.
2.
3.
4.
Pull 3 knobs from rotary controls.
Pull knob from blower switch.
Remove 2 retaining screws and remove
graphics panel.
5.
6.
7.
Remove 4 screws retaining switch.
Remove switch panel.
Release fascia centre louvre vent panel from its
fitted position to gain access to rear of panel.
See CHASSIS AND BODY, Repair, Dash
Panel Central Louvre Panel
1.
2.
3.
4.
5.
6.
7.
Pull 3 knobs from rotary controls.
Pull knob from blower switch.
Remove 2 screws retaining graphics panel.
Remove graphics plate.
Remove capless bulb.
Remove 4 screws retaining switch.
Remove switch panel. Use plastic tube to assist
removal.
Blower switch
8.
9.
Pull blower switch from rear of panel.
Disconnect multiplug and remove blower switch.
Refit
10.
Reverse removal procedure.
REPAIR
1
Product Specification
CategoriesLand Rover Discovery, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 873 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDiscovery
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field