UNDERSTANDING THE FEATURES OF YOUR VEHICLE
61
To Deactivate
A soft tap on the brake pedal, norm al braking, or pressing
the CAN CEL button will deactivate the Speed Control
withou t erasing the memory. Pressing the ON·OFF but-
ton or turning off the ignition erases the memory.
3
To Resume Speed
To resu me a previou sly set speed , press and release the
RESUME/ ACCEL button. Resume can be used at any
speed above 30 mph (50 km/ h).
To Vary The Speed Setting
When the Speed Control is on and set, speed can be
increased by pressing and hold ing the RESUME/ ACCEL
button. When the button is released , a new set speed will
be established .
To Activate
Press and release the ON·OFF button to turn the system
on. To turn the system off, press the ON·OFF button
again. The system shou ld be turned off when not in use.
The CRUISE ind icator light in the instru ment cluster
illuminates when the system is on.
Tapping the RESUME/ ACCEL button once will resu lt in
a 2 mph (3 km/ h) speed increase. Each time the button is
tap ped, speed increases, so tap ping the button three
times will increase speed by 6 mph (9 km/ h), etc.
To Set At A Desired Speed
When the vehicle has reached the desired speed , press
and release the SET button. Release the accelerator and
the vehicle will operate at the selected speed .
To decrease speed while speed control is on and set, press
and hold the COAST button. Release the button when the
desired speed is reached , and the new speed will be set.
| Categories | Jeep Manuals, Jeep Wrangler Manuals |
|---|---|
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)