34
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
Up to eight transm itters can be program med to your vehicle.
To obtain additional transm itters, contact your authorized
dealer. To program a transm itter (within 23–50 ft/ 7–15 m of
the vehicle), perform the following procedure:
each transm itter to be program med. You will hear a chime
when a transm itter has been successfully program med.
GENERAL INFORMATION
This transm itter complies with FCC rules part 15 and
with RSS-210 of Ind ustry Canad a. Operation is subject to
the follow ing two cond itions:
1.
Gather every transm itter that is to be used with the
vehicle inclu ding any transm itters that are currently
program med.
1.
This device may not cause harm ful interference.
2.
Enter Program Mode: Turn the ignition to the ON
2.
This device must accep t any interference that may be
position, and using a currently program med transm itter;
press and hold the ЉUnlockЉ button on the transm itter.
Continu e to hold the “Unlock” button, wait at least four
but no longer than 10 second s, then press and hold the
PANIC button for at least one second . Release both
buttons simultaneou sly.
received , inclu ding interference that may cause und es-
ired operation.
If you r Remote Keyless Entry fails to operate from a
norm al distance, check for these two cond itions:
1.
Weak batteries in transm itter. The expected life of
3.
Program Each Transmitter: All transm itters to be used
batteries is from one to two years
with you r vehicle must be program med as follow s:
2.
Closeness to a rad io transm itter such as a rad io station
Press and release the ЉLockЉ and ЉUnlockЉ buttons simulta-
neou sly, followed by a press and release of ANY button on
tow er, airp ort transm itter, and som e mobile or CB rad ios.
Product Specification
Categories | Chrysler Manuals, Chrysler PT Cruiser Manuals |
---|---|
Model Year | 2008 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Just got the car don't have one I have a 2008 wagon
which fuse is for the battery