WHAT TO DO IN EMERGENCIES
369
6.
If the vehicle is equ ipped with Sentry Key Immobi-
WARN ING!
lizer, turn the ignition switch to the ON position for 3
second s before moving the ignition switch to the START
position.
Battery flu id is a corrosive acid solu tion ; do not allow
battery flu id to contact eyes, skin or cloth ing. Don’t
lean over battery when attach ing clam ps or allow the
clam ps to tou ch each oth er. If acid splash es in eyes or
on skin, flu sh the contam inated area immediately
with large quantities of water.
7.
battery, let the engine idle a few minu tes, then start the
engine in the vehicle with the discharged battery.
Start the engine in the vehicle that has the booster
8.
When rem oving the jumper cables, reverse the se-
A battery gen erates hydrogen gas which is flam -
mable and explosive. Keep flam e or spark away from
the ven t holes. Do not use a booster battery or any
oth er booster sou rce with an output that exceed s 12
volts.
quence exactly. Be carefu l of the moving belts and fan.
6
DRIVING ON SLIPPERY SURFACES
ACCELERATION
Rapid acceleration on snow covered , wet, or other slip-
pery surfaces may cause the front wheels to pull errati-
cally to the right or left. This phenom enon occurs when
there is a difference in the surface traction und er the front
(driving) wheels.
5.
Connect the other cable, first to the negative term inal
of the booster battery and then to the negative term inal of
the discharged battery. Make sure you have a good
contact.
| Categories | Chrysler Manuals, Chrysler PT Cruiser Manuals |
|---|---|
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 5 out of 5)
Automotive readers have rated 2008 Chrysler PT Cruiser Owners Manual 5.0 out of 5.0 based on 2 product reviews. Just got the car don't have one I have a 2008 wagon
which fuse is for the battery