366
WHAT TO DO IN EMERGENCIES
4.
Raise the vehicle by turning the jack screw to the right,
WARN ING!
using the swivel wrench. Raise the vehicle only until the
tire just clears the surface and enou gh clearance is
obtained to install the spare tire. Minim um tire lift
provid es maxim um stability.
To avoid possib le person al injury, handle the wheel
covers with care to avoid contact with any sharp
edges.
WARN ING!
NOTE: The wheel cover is held on the wheel by the
wheel nu ts. When reinstalling original wheel, prop erly
align the wheel cover to the valve stem , place the wheel
cover onto the wheel, then install the wheel nu ts.
Raisin g the veh icle high er than necessary can make
the veh icle less stab le. It could slip off the jack and
hurt som eon e near it. Raise the veh icle only enough
to rem ove the tire.
6.
Lower the vehicle by turning the jack screw to the left.
7.
while tightening the wheel nu ts. Alternate nu ts until each
nu t has been tightened twice. Correct wheel nu t torqu e is
100
tightened the nu ts correctly, have them checked with a
torqu e wrench by you r dealer or at a service station.
Finish tightening the nu ts. Push down on the wrench
5.
Remove the wheel nu ts and pull the wheel and wheel
covers where applicable off the hu b. Install the spare
wheel and wheel nu ts with the cone shap ed end of the
nu ts tow ard the wheel. Lightly tighten the nu ts. To avoid
the risk of forcing the vehicle off the jack, do not tighten
the nu ts fully until the vehicle has been lowered .
ft. lbs (135 N·m). If you doubt that you have
Product Specification
Categories | Chrysler Manuals, Chrysler PT Cruiser Manuals |
---|---|
Model Year | 2008 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Just got the car don't have one I have a 2008 wagon
which fuse is for the battery