396
MAINTAINING YOUR VEHICLE
amount of a high quality lubricant such as Mop ar Lock
Win dshield Wip er Blad e Rep lacem ent
Cylind er Lubricant directly into the lock cylind er.
1.
Lift the wiper arm away from the glass.
WINDSHIELD WIPER BLADES
2.
the wiper blad e assem bly down along the arm . Gently
place the wiper arm on the wind shield .
Push the release tab show n in the illustration and slide
Clean the rubber edges of the wiper blad es and the
wind shield period ically with a sponge or soft cloth and a
mild non abrasive cleaner or use the washer solvent. This
will rem ove accumulations of salt, waxes or road film
and help red uce streaking and smearing.
3. Install the new blad e assem bly onto the wiper arm tip
until it locks in place.
Operation of the wipers on dry glass for long period s
may cause deterioration of the wiper blad es. Alw ays use
washer fluid when using the wipers to rem ove salt or dirt
from a dry wind shield . Avoid using the wiper blad es to
rem ove frost or ice from the wind shield . make sure that
they are not frozen to the glass before turning them on to
avoid damaging the blad e. Keep the blad e rubber out of
contact with petroleu m prod ucts such as engine oil,
gasoline, etc.
NOTE: Alw ays refer to the wiper blad e packaging for
specific installation instru ctions. Many wiper blad e re-
placem ents fit multiple vehicles.
WINDSHIELD WASHER RESERVOIR
NOTE: Alw ays refer to the wiper blad e packaging for
specific installation instru ctions. Many wiper blad e re-
placem ents fit multiple vehicles.
The washer fluid reservoir is located in the rear of the
engine compartm ent on the passenger side and shou ld be
Product Specification
Categories | Chrysler Manuals, Chrysler PT Cruiser Manuals |
---|---|
Model Year | 2008 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Just got the car don't have one I have a 2008 wagon
which fuse is for the battery