THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
19
location. This nu mber is requ ired for dealer rep lacem ent
of Fobs. Duplication of Fobs may be perform ed at an
authorized dealer or by using the Custom er Key Pro-
gram ming proced ure. This proced ure consists of pro-
gram ming a blank Fob to the vehicle electronics. A blank
Fob is one, which has never been program med.
2. Insert the second valid key and turn the ignition
switch ON within 15 second s. After ten second s, a chim e
will sou nd and the Vehicle Security Alarm Ind icator
Light will begin to flash. Turn the ignition switch OFF 2
and rem ove the second key.
3.
Insert a blank Sentry Key into the ignition switch and
NOTE:
System serviced , brin g all veh icle Fobs with you to the
dealer.
When havin g the Sen try Key Immobilizer
turn the ignition switch ON within 60 second s. After 10
second s, a single chim e will sou nd and the Vehicle
Security Alarm Ind icator Light will stop flashing, turn on
again for 3 second s, and then turn off.
Customer Key (Fob) Programming
If you have two valid sentry keys, you can program new
sentry keys to the system by perform ing the follow ing
proced ure:
The new Sentry Key is program med. The Keyless Entry
Transmitter will also be program med durin g this pro-
cedure.
1.
Insert the first valid key into the ignition switch and
Repeat this proced ure to program up to 8 keys. If you do
not have a program med sentry key, contact you r dealer
for details.
turn the ignition switch ON for at least 3 second s but no
longer than 15 second s. Turn the ignition switch OFF and
rem ove the first key.
Product Specification
Categories | Jeep Grand Cherokee Manuals, Jeep Manuals |
---|---|
Model Year | 2008 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |