STARTING AND OPERATING
285
1.
2.
shift lock manu al overrid e cover which is located on the
PRNDL bezel.
Firmly set the parking brake.
5. Move the shift lever into the N (Neutral) position.
Using a flat blad e screw driver, carefu lly rem ove the
6.
The vehicle may then be started in N (Neutral).
Have you r vehicle insp ected by you r local authorized
dealer, if the shift lock manu al overrid e has been used .
3.
4.
Depress and maintain firm pressure on the brake pedal.
Using the screw driver, reach into the manu al overrid e
Brake/Transmission Interlock System
This system prevents you from moving the gear shift out
of P (Park) and into any gear unless the brake pedal is
pressed . This system is active only while the ignition 5
switch is in the ON position. Alw ays depress the brak e
pedal first, before moving the gear selector out of P
(Park).
opening. Press and hold the shift lock lever down.
5–Speed
Automatic Transmission
The electronically controlled transm ission provid es a
precise shift sched ule. The transm ission electronics are
self-calibrating; therefore, the first few shifts on a new
Product Specification
Categories | Jeep Grand Cherokee Manuals, Jeep Manuals |
---|---|
Model Year | 2008 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |