THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
37
•
•
There are also pinch sensors attached to the side of the
liftgate. Light pressu re anyw here along these strip s
will cause the liftgate to retu rn to the open position.
(62° C). Be sure to rem ove any build-up of snow or ice
from the liftgate before pressing any of the power
liftgate switches.
2
The liftgate must be in the full open position in ord er
to power close. If the liftgate is not fully open, press
the power button to fully open the liftgate and then
you can press the power button to close.
• wIfithinthe ptheowersamliftgatee cycle,encouthenterssystemmuwltipillleauobstrutom aticallyctions
stop and must be opened or closed manu ally.
WARN ING!
•
•
•
If the liftgate release switch is activated while the
power liftgate is closing, the liftgate will reverse to the
full open position.
•
Drivin g with the liftgate open can allow poison -
ous exhaust gases into you r veh icle. You and you r
passen gers could be injured by these fumes. Keep
the liftgate closed when you are operatin g the
veh icle.
The power liftgate switches will not operate if the
vehicle is in gear or the vehicle speed is above 0 mph
(0
km/ h).
•
If you are req uired to drive with the liftgate open,
make sure that all windows are closed , and the
clim ate control blow er switch is set at high speed .
DO NOT use the recircu lation mode.
The power liftgate will not operate in tem peratu res
below Ϫ12° F (Ϫ24° C) or tem peratu res above 143° F
Product Specification
Categories | Chrysler Manuals, Chrysler Pacifica Manuals |
---|---|
Model Year | 2008 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |