MAINTAINING YOUR VEHICLE
399
4.
Place the gear selector momentarily in each gear
position end ing with the lever in P (PARK). Wipe the area
arou nd the dipstick clean to eliminate the possibility of
dirt entering the transm ission.
5.
Remove the dipstick and determ ine if the fluid is hot
or warm . Hot fluid is approxim ately 180°F (82°C), which
is the norm al operating tem peratu re after the vehicle has
been driven at least 15 miles (24 km). The fluid cannot be
comfortably held betw een the finger tips. Cold is when
the fluid is below 80°F (27°C).
Proced ure For Checking Fluid Level
The fluid level in the autom atic transm ission shou ld be
checked whenever the vehicle is serviced . Operation with
an improp er fluid level will greatly red uce the life of the
transm ission and of the fluid.
6.
Wipe the dipstick clean and reinsert until seated .
To prop erly check the autom atic transm ission fluid level,
the follow ing proced ure must be used :
Remove dipstick and note read ing.
7
a. If the fluid is hot, the read ing shou ld be in the
crosshatched area marked “HOT” (betw een the upper
two holes in the dipstick).
1.
The vehicle must be on level grou nd .
2.
The engine shou ld be running at curb idle speed for a
minim um of 60 second s.
b. If the fluid is cold, the fluid level shou ld be betw een
the lower two holes in the area marked “COLD”.
3.
Fully apply parking brake.
| Categories | Chrysler Manuals, Chrysler Pacifica Manuals |
|---|---|
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)