WHAT TO DO IN EMERGENCIES
427
10.
Lower the vehicle by turning the jack screw to the 13. Place the deflated (flat) tire and compact spare tire
left.
cover assem bly. in the rear cargo area. Do not stow the
deflated tire in the spare tire location . Have the full-
sized tire rep aired or rep laced , as soon as possible.
11.
wrench while tightening for increased leverage. Alternate
Finish tightening the lug nu ts. Push down on the
lug nu ts until each nu t has been tightened twice. The 14. Stow the cable and wheel spacer before driving the
correct wheel nu t tightness is 95 ft lbs (130 N·m). If in vehicle. Reassem ble the winch hand le extensions to form
doubt abou t the correct tightness, have them checked a “T” and fit the winch “T” hand le over the drive nu t.
with a torqu e wrench by you r authorized dealer or at a Rotate the nu t to the right until the winch mechanism
service station.
clicks at least three times.
12.
Lower the jack to its fully-closed position.
15. Stow the jack, jack hand le and winch hand le tools.
6
16.
Check the compact spare tire pressu re as soon as
WARN ING!
possible. Correct the tire pressu re, as requ ired .
A loose tire or jack throw n forw ard in a collision or
hard stop could endanger the occupants of the ve-
hicle. Alw ays stow the jack parts and the spare tire in
the places provid ed. Have the deflated (flat) tire
rep aired or rep laced immediately.
Wheel Nuts
All wheel nu ts shou ld be tightened occasionally, to
eliminate the possibility of wheel stu ds being sheared or
the bolt holes in the wheels becom ing elongated . This is
especially important during the first few hu nd red miles
Product Specification
Categories | Chrysler Manuals, Chrysler Town and Country Manuals |
---|---|
Model Year | 2009 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |