442
MAINTAINING YOUR VEHICLE
filler cap message will be displayed in the instru ment Ind icator Light (MIL)” is functioning and is not on when
cluster. Tighten the gas cap until a ЉclickingЉ sou nd is the engine is running, and that the OBD II system is
heard . This is an ind ication that the gas cap is prop erly read y for testing.
tightened . Press the odometer reset button to turn the
Norm ally, the OBD II system will be read y. The OBD II
message off. If the problem persists, the message will
system may not be read y if you r vehicle was recently
appear the next time the vehicle is started . If the problem
serviced , recently had a dead battery or a battery rep lace-
is detected twice in a row, the system will turn on the
ment. If the OBD II system shou ld be determ ined not
Malfu nction Ind icator Light (MIL). Resolving the prob-
read y for the I/ M test, you r vehicle may fail the test.
lem will turn the MIL light off. Take you r vehicle in to an
authorized dealer.
Your vehicle has a simple ignition key-actu ated test,
which you can use prior to going to the test station. To
check if you r vehicle’s OBD II system is read y, you must
do the follow ing:
EMISSIONS INSPECTION AND MAINTENANCE
PROGRAMS
In som e localities, it may be a legal requ irem ent to pass
an insp ection of you r vehicle’s emissions control system .
Failu re to pass could prevent vehicle registration.
1.
Insert you r ignition key into the ignition switch.
2.
Turn the ignition to the ON position, but do not crank
or start the engine.
If you crank or start the engine, you will have to start
this test over.
For states that requ ire an Insp ection and Mainte-
nance (I/ M), this check verifies the “Malfu nction
3.
| Categories | Chrysler Manuals, Chrysler Town and Country Manuals |
|---|---|
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)