STARTING AND OPERATING
193
speed . Additional traction and maxim um pulling power
for loose, slippery road surfaces only. Do not exceed 25
mph (40 km/ h).
coasting at 2 to 3 mph (3 to 5 km/ h), shift the transfer
case lever firm ly into the desired position. Do not pause
in transfer case N (Neutral).
Shifting Procedure
NOTE: Pau sing in transfer case N (Neutral) in vehicles
equ ipped with an autom atic transm ission may requ ire
shu tting the engine OFF to avoid gear clash while
completing the shift. If difficulty occurs, shift the trans-
mission into N (Neutral), hold foot on brake, and turn the
engine OFF. Make shift to desired mode.
5
NOTE: Shifting into or out of 4LO is possible with the
vehicle completely stop ped, how ever difficulty may oc-
cur due to the mating clutch teeth not being prop erly
aligned . Several attem pts may be requ ired for clutch
teeth alignm ent and shift completion to occur. The pre-
ferred method is with the vehicle rolling 2 to 3 mph (3 to
5
with the vehicle moving faster than 2 to 3 mph (3 to 5
km/ h).
km/ h). Avoid attem pting to engage or disengage 4LO
4
With the vehicle rolling at 2 to 3 mph (3 to 5 km/ h), shift
the transm ission into N (Neutral). While the vehicle is
ALL TIM E to 4 LO or 4 LO to 4 ALL TIM E
| Categories | Jeep Grand Cherokee Manuals, Jeep Manuals |
|---|---|
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)