UNDERSTANDING THE FEATURES OF YOUR VEHICLE
79
Fog Lights — If Equipped
Turn Signals
The fog light switch is located in the multi-
function control lever. To activate the fog lights,
turn on the park/ turn lights, low beam head lights,
or AUTO head lights and pull out the end of the multi-
function control lever. A light in the instru ment cluster
show s when the fog lights are on.
Move the multi-function control lever up or down and
the arrow s on each side of the instru ment cluster will
flash to show prop er operation of the front and rear turn
signal lights. You can signal a lane change by moving the
lever partially up or down.
3
Headlight Dimmer Switch
NOTE: Turning on the high beam head lights turns off
the fog lights.
Pull the multi-function control lever tow ard s you to
switch the head lights to “High” beam . The “High Beam
Ind icator Light” on the instru ment cluster will illumi-
nate.Pu ll the multi-function control lever a second time to
switch the head lights to “Low ” beam .
A front fog light is a lighting device provid ing illumina-
tion forw ard of the vehicle und er cond itions of fog, rain,
snow, or dust. Princip ally, the front fog light supplements
the lower beam of a stand ard head light system .
Passing Light
You can signal another vehicle with you r head lights by
lightly pulling the multi-function control lever tow ard
the steering wheel. This will cause the head lights to turn
on at high beam and rem ain on until the lever is released .
NOTE: Prop er aim and adjustm ents of the front fog
lights shou ld be made to prevent excessive glare for other
drivers.
| Categories | Jeep Grand Cherokee Manuals, Jeep Manuals |
|---|---|
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)