THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
23
4.
six times. Test the transm itter operation.
Reset the transm itter by pressing the “Unlock” button
liftgate will cancel the arm ing. If the system successfu lly
arm s, the red light will flash at a slow er rate to ind icate
the alarm is set.
SECURITY ALARM SYSTEM — IF EQUIPPED
This system monitors the vehicle doors, liftgate, liftgate
flipper glass, and ignition for unau thorized operation.
When the alarm is activated , the system provid es both
audible and visu al signals. The horn will sou nd rep eat-
edly for three minu tes and the head lights and taillights
will flash for an additional 15 minu tes.
2
To Disarm the System
To disarm the system , use the rem ote keyless entry
transm itter or the key to unlock the driver’s door. If
som ething has triggered the system in you r absence, the
horn will sou nd three times when you unlock the doors.
Check the vehicle for tam pering.
The Security Alarm System is designed to protect you r
vehicle; how ever, you can create cond itions where the
system will arm unexp ected ly. If you rem ain in the
vehicle and lock the doors with the transm itter, once the
system is arm ed (after 16 second s), when you pull the
door hand le to exit the alarm will sou nd . If this occurs,
press the “Unlock” button on the rem ote keyless entry
To Set the Alarm
The alarm will set when you use the rem ote keyless entry
transm itter to lock the doors and liftgate or when you use
the power door lock switch while the door is open. After
all the doors are locked and closed , a red light on top of
the instru ment panel will flash rap idly for abou t 16
second s to signal that the system is arm ing. During this
16
second pre-arm period , opening any door or the
| Categories | Jeep Grand Cherokee Manuals, Jeep Manuals |
|---|---|
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)