UNDERSTANDING THE FEATURES OF YOUR VEHICLE
111
The traction control system (TCS) warning
light is located in the instru ment cluster. The
TCS light will flash as soon as the tires lose
traction and the wheels begin to spin. This
ind icates that the TCS system is active. If the TCS
warning light begins to flash during acceleration, ease up
on the accelerator and apply as little throttle as possible.
Be sure to adapt you r speed and driving to the prevailing
road cond itions. When the TCS warning light is illumi-
nated continu ously, the TCS is switched off. To retu rn to
the enhanced vehicle stability offered by TCS, press the
TCS switch (the TCS warning light in the instru ment
cluster goes out). Avoid spinning one drive wheel. This
may cause seriou s damage to the drive train and is not
covered by the Daim lerChrysler warranty.
3
TCS OFF switch
To turn the system back ON, press the TCS OFF switch a
second time until the traction control Ind icator turns OFF.
The TCS OFF switch is located on the center of the
instru ment panel. To turn the traction control system OFF
press the TCS OFF switch until the traction control
Ind icator in the instru ment cluster lights up.
NOTE:
• Theignitiontractionswitchcontrolis turnedsystemONcom. Thises wonilleachoccurtimevene theif
you used the switch to turn the system OFF.
To improve the vehicle’s traction when driving with
snow chains, or starting off in deep snow, sand or gravel,
switch off the TCS system by pressing the TCS switch.
• TheclickingTractionsou ndControls when insystemoperation.will make buzzing or
| Categories | Chrysler 300 Manuals, Chrysler Manuals |
|---|---|
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)