THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
35
Enhanced Driver Seat Belt Reminder System
(BeltAlert)
or START position. Daim lerChrysler does not recom -
mend deactivating
(BeltAlert).
the Enhanced Warning System
If the driver’s seat belt has not been buckled within 60
second s of starting the vehicle and if the vehicle speed is
greater than 5 mph (8 km/ h), the Enhanced Warning
System (BeltAlert) will alert the driver to buckle their seat
belt. The driver shou ld also instru ct all other occupants to
buckle their seat belts. Once the warning is triggered , the
Enhanced Warning System (BeltAlert) will continu e to
chim e and flash the Seat Belt Warning Light for 96
second s or until the driver’s seat belt is buckled . The
Enhanced Warning System (BeltAlert) will be reactivated
if the driver’s seat belt is unbu ckled for more than 10
second s and the vehicle speed is greater than 5 mph (8
km/ h).
2
1.
Turn the ignition switch to the LOCK position and
buckle the driver’s seat belt.
2. Start the engine and wait for the Seat Belt Warning
Light to turn off.
3.
Within 60 second s of starting the vehicle, unbu ckle
and then re-bu ckle the driver’s seat belt at least three
times within 10 second s, end ing with the seat belt
buckled .
NOTE: Watch for the Seat Belt Warning Light to turn on
while unbu ckling and off while re-bu ckling the seat belt.
It may be necessary to retract the seat belt.
The Enhanced Warning System (BeltAlert) can be en-
abled or disabled by you r authorized dealer or by
follow ing these step s:
4. Turn off the engine. A single chim e will sou nd to
signify that you have successfu lly completed the pro-
gram ming.
NOTE: The follow ing step s must occur within the first
60
second s of the ignition switch being turned to the ON
The Enhanced Warning System (BeltAlert) can be reacti-
vated by rep eating this proced ure.
Product Specification
Categories | Chrysler 300 Manuals, Chrysler Manuals |
---|---|
Model Year | 2005 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |