118
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Front Panel(s) Installation Only (With Rear Hard
Top Removed)
NOTE: The front panel(s) must be positioned prop erly
to ensu re sealing. Set the panels on the wind shield fram e
so that there is no overhang. Also, make sure that the
panels are sitting flush with the bod y.
1.
Turn the left and right panels over and move the
spacer block (located on the rear of the panel) upward 90
degrees.
2. Install the right panel first, then the left panel.
3.
Reinstall the panel(s) using the sam e step s for rem oval
in reverse ord er.
Rear Hard Top Removal
1.
Remove both front panels. Refer to “Front Panel(s)
Removal” in this section.
2.
3.
Open both doors.
Remove the two Torx head screw s that secure the
hard top at the B-pillar (near the top of the door) using a
#40
Torx head driver (Four–Door Only).
| Categories | Jeep Manuals, Jeep Wrangler Manuals |
|---|---|
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)