328
STARTING AND OPERATING
The follow ing proced ure will disable (or re-enable) ESP 9. Turn the steering wheel back to center.
functionality in the vehicle:
10.
11.
Press and hold the ESP OFF button for seven second s.
1.
2.
Shift the transfer case into the 4H range position.
Turn the steering wheel until it is centered and the
Cycle the ignition key to OFF.
After perform ing the ESP disable proced ure correctly,
“ESP OFF” will be displayed in the odometer for approxi-
mately 12 second s each time the ignition is moved to ON.
Repeating the ESP disable proced ure will re-enable nor-
mal ESP operation.
wheels are pointed straight ahead .
3.
Cycle the ignition key OFF to ON.
4.
check.
Wait approxim ately five second s for the system bulb
ESP/BAS Warning Light
5.
Turn and hold the steering wheel one-half turn to the
The malfunction ind icator lamp for the ESP is
combined with the BAS ind icator. The “ESP/
BAS Warning Light” in the instru ment cluster
comes on when the ignition switch is turned to
the “ON ” position. It shou ld go out with the engine
running.
right (clockw ise).
6.
Press and hold the ESP OFF button for seven second s.
7.
Turn the steering wheel back to center, and turn and
hold an additional one-half turn to the left (counterclock-
wise).
8.
Press and hold the ESP OFF button for seven second s.
| Categories | Jeep Manuals, Jeep Wrangler Manuals |
|---|---|
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)