STARTING AND OPERATING
275
STARTING PROCEDURES
enhances off-road perform ance by allow ing the vehicle to
Before starting you r vehicle, adjust you r seat, adjust both start when in 4L withou t having to press the clutch pedal.
insid e and outsid e mirrors, and fasten you r seat belts.
The “4WD Ind icator Light” will illuminate when the
transfer case has been shifted into this mode.
WARN ING!
Automatic Transmission
Do not leave child ren or animals insid e park ed
veh icles in hot weath er. Interior heat build up may
cause seriou s injury or death .
Start the engine with the shift lever in the NEUTRAL or
PARK position. Apply the brake before shifting to any
driving range.
5
Normal Starting
Manual Transmission
Apply the parking brake, place the shift lever in NEU- NOTE: Norm al starting of either a cold or a warm
TRAL, and press the clutch pedal before starting the engine is obtained withou t pumping or pressing the
vehicle. This vehicle is equ ipped with a clutch interlock- accelerator pedal.
ing ignition system . It will not start unless the clutch
Turn the ignition switch to the START position and
pedal is pressed to the floor.
release when the engine starts. If the engine fails to start
Four-Wheel Drive Models Only
within 10 second s, turn the ignition switch to the LOCK
In 4L mode, this vehicle will start regard less of whether position, wait 10 to 15 second s, then rep eat the “Norm al
or not the clutch pedal is pressed to the floor. This featu re Starting” proced ure.
| Categories | Jeep Manuals, Jeep Wrangler Manuals |
|---|---|
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)