296
STARTING AND OPERATING
This system is controlled by the SWAY BAR switch located Ind icator Light” will flash during activation transition, or
on the lower switch bank (below the climate controls).
when activation cond itions are not met. The stabilizer/
sway bar shou ld rem ain in on-road mode during norm al
driving cond itions.
WARN ING!
Do not discon nect the stab ilizer bar and drive on
hard -surfaced road s or at speed s above 18 mph
(29
km/h); you may lose control of the veh icle, which
could resu lt in seriou s injury. The fron t stab ilizer bar
enhances veh icle stab ility and is necessary for main -
tain ing control of the veh icle. The system monitors
veh icle speed and will attem pt to recon nect the
stab ilizer bar at speed s over 18 mph (29 km/h). This is
indicated by a flash ing or solid “Sw ay Bar Indicator
Ligh t.” Once veh icle speed is red uced below 14 mph
Sway Bar Switch
Press the SWAY BAR switch to activate the system . Press
the switch again to deactivate the system . The “Sway Bar
Ind icator Light” (located in the instru ment cluster) will
illuminate when the bar is disconnected . The “Sway Bar
(22
km/h), the system will once again attem pt to
retu rn to off-road mode.
| Categories | Jeep Manuals, Jeep Wrangler Manuals |
|---|---|
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)