WHAT TO DO IN EMERGENCIES
389
1.
bracelets which might make an unintend ed electrical
contact.
Remove all metal jewelry such as watch band s or
WARN ING!
Do not perm it veh icles to tou ch each oth er as this
could estab lish a grou nd connection and person al
injury could resu lt.
2.
Park the booster vehicle within cable reach but with-
out letting the vehicles tou ch. Set the parking brake on
both vehicles, shift the autom atic transm ission into
PARK, or the manu al transm ission into NEUTRAL, and
turn the ignition to LOCK.
5.
Connect the other cable, first to the negative term inal
of the booster battery and then to the engine of the
vehicle with the discharged battery. Make sure you have
3.
Turn off the heater, rad io, and all unnecessary electri- a good contact on the engine.
cal load s.
6.
Start the engine in the vehicle which has the booster
6
4.
Connect one end of a jumper cable to the positive battery, let the engine idle a few minu tes, then start the
term inal of the booster battery. Connect the other end of engine in the vehicle with the discharged battery.
the sam e cable to the positive term inal of the discharged
7.
sequ ence exactly. Be carefu l of the moving belts and fan.
When rem oving the jumper cables, reverse the above
battery.
| Categories | Jeep Manuals, Jeep Wrangler Manuals |
|---|---|
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)