UNDERSTANDING THE FEATURES OF YOUR VEHICLE
95
To change the brightness of the instru ment panel lights, Headlight Dimmer Switch
rotate the center portion of the multifunction lever up or Push the multifunction lever away from you to switch
down.
the head lights to high beam . Pull the lever tow ard you to
switch the head lights back to low beam .
NOTE:
•
Lens fogging can occur und er certain atm osp heric
Flash-To-Pass
3
cond itions. This will usually clear as atm osp heric You can signal another vehicle with you r head lights by
cond itions change to allow the cond ensation to change lightly pulling the multifunction lever tow ard the steer-
back into a vap or. Turning the lamps on will usually ing wheel. This will turn on the high beam head lights
accelerate the clearing process.
until the lever is released .
•
If the driver’s door is left open, and the head lights or Front Fog Lights — If Equipped
parking lights are left on, the high Beam Ind icator
Light will rem ain illuminated and a chim e will sou nd .
The front fog light switch is located on the multi-
function lever. To activate the front fog lights, turn
on the parking or low beam head lights and pull
Lights-On Reminder
If the head lights or parking lights are on after the ignition
out the end of the lever.
is turned OFF, a chim e will sou nd when the driver’s door NOTE: The fog lights will only operate with the parking
is opened .
lights or the head lights on low beam . Selecting high
beam head lights will turn off the fog lights.
| Categories | Jeep Manuals, Jeep Wrangler Manuals |
|---|---|
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)