SEATS
26.
27.
Position arm rest to seat, secure with screw and
loosen arm rest adjuster to the required
position.
Fit front seat.
+
SEATS, REPAIRS, Seat - front.
30.
31.
Remove headrest guides.
Fold cover fully upwards and remove.
Refit
1.
Fit squab cover to top of seat. Do not fold down
too far onto seat.
2.
3.
Fit headrest guides.
Fit grab handles to seat and secure with
screws.
4.
5.
6.
7.
Ensure top of cover fits correctly around grab
handles.
Fit bar securing rear of squab cover to seat
frame.
Fit hog rings securing rear of squab cover to
seat frame.
Pull cover down tight and align hog ring
location points.
8.
9.
Fit third row of hog rings.
Pull cover down tight and feed hooks though
foam.
10.
11.
Connect hooks to rear of squab frame.
Align stowage pocket elastic to seat frame and
secure with trim clips.
12.
Pull cover down tight and align hog ring
location points.
13.
14.
Fit second row of hog rings.
Pull cover down tight and align hog ring
location points.
15.
16.
Fit first row of hog rings.
Pull cover down tight and connect hooks to
squab frame.
17.
18.
19.
20.
21.
22.
Feed front of cover through to rear.
Secure bottom of cover to frame with clip.
Fit clips securing ends of cover to frame.
Fit headrest to seat.
Turn seat upside down.
Secure rear edge of squab cover to frame with
clip.
23.
24.
25.
Turn seat correct way up.
Fit inner edge trim casing to seat frame.
Fit outer edge trim casing and secure with
screws.
76-5-30
REPAIRS
Product Specification
Categories | Land Rover Defender, Land Rover Discovery II, Range Rover |
---|---|
Tags | Land Rover |
Model Year | 1999 |
Download File |
|
Document Type | Workshop Manual |
Language | English |
Product Name | Discovery Series II |
Product Brand | Land Rover |
Document File Type | |
Publisher | landrover.com |
Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
Copyright | Attribution Non-commercial |