1999 Land Rover Discovery Series II Workshop Manual

STEERING
38.
39.
Fit new seal, connect PAS cooler pipe and
tighten union nut to 24 Nm (18 lbf ft).
LHD only: Fit turbocharger intercooler feed
pipe and vacuum connection. Fit new seal to air
cleaner. Connect air intake hose and secure
clips. Connect multiplug to MAF sensor.
Clean chassis and surrounding area.
Fit underbelly panel.
Power steering pressure check - V8 LHD
models
$% 57.90.10.01
40.
41.
Check
+
EXTERIOR FITTINGS, REPAIRS,
1.
2.
3.
4.
Disconnect battery earth lead.
Syphon PAS fluid from reservoir.
Raise front of vehicle and support on stands.
Turn steering on LH lock.
Panel - underbelly.
Remove adaptor and hose set from tool LRT-
42.
57-041.  
43.
44.
Check PAS fluid level.
Connect battery earth lead.
5.
Remove 3 screws securing LH splash shield
and remove shield.
6.
7.
8.
Release clip securing PAS pipes.
Position absorbent cloth to catch spillage.
Position container to collect PAS fluid spillage.
57-22
ADJUSTMENTS
Product Specification
CategoriesLand Rover Defender, Land Rover Discovery II, Range Rover
Tags
Model Year1999
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 1529 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDiscovery Series II
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field