ENGINE - V8
8.
Remove crankshaft sensor cover.
Flywheel
$% 12.53.07
Remove
9. Remove 2 nuts securing crankshaft sensor.
10.
Remove crankshaft sensor.
1.
Remove gearbox
MANUAL GEARBOX - R380,
+
REPAIRS, Gearbox - V8.
2.
Restrain flywheel.
11.
12.
Remove 6 bolts securing flywheel.
Remove flywheel.
On early engines, balance weights are on
engine side of flywheel; replacement flywheels
will have balance weights on clutch side of
flywheel.
3.
Working in sequence, progressively slacken 6
bolts securing clutch cover to flywheel.
Remove bolts.
4.
5.
Remove clutch cover.
Remove clutch plate.
Refit
1.
Clean mating faces of flywheel and crankshaft,
dowel and dowel hole. Ensure bolt holes in
crankshaft are clean and dry.
2.
Fit flywheel to crankshaft and tighten bolts to
78 Nm (58 lbf.ft).
3.
4.
Clean crankshaft sensor and mating face.
Fit crankshaft sensor and tighten nuts to 6 Nm
(4.4 lbf.ft).
5.
Fit crankshaft sensor cover and tighten bolts to
6 Nm (5 lbf.ft).
6.
7.
Fit crankshaft sensor multiplug to bracket.
Clean clutch cover, drive plate and spigot bush
in end of crankshaft. Renew worn components
as necessary.
8.
If refitting existing drive plate, apply 'Molycote
FB 180' to splines.
6.
7.
Release crankshaft sensor multiplug from
bracket.
Remove 2 bolts securing crankshaft sensor
cover.
REPAIRS 12-2-31
| Categories | Land Rover Defender, Land Rover Discovery II, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1999 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery Series II |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)