EXTERIOR FITTINGS
Cable - bonnet release - from 03MY
$% 76.16.29
Remove
1.
Remove the front grille.
EXTERIOR FITTINGS, REPAIRS,
+
Grille - front - from 03MY.
M76 3029B
5.
6.
Remove 2 nuts securing bonnet release lever
to the 'A' post.
Disconnect bonnet release cable from the
bonnet release lever.
2.
3.
Drill out 4 rivets securing bonnet lock shield to
the bonnet locking platform and remove the
shield.
Disconnect bonnet release cable from the
bonnet lock.
M76 4574
7.
Remove bonnet release cable grommet from
the bulkhead.
8.
9.
Remove the bonnet release cable.
Remove grommet from the bonnet release
cable.
Refit
1.
2.
Fit grommet to the bonnet release cable.
Position bonnet release cable to body and
connect to the bonnet release lever.
Position bonnet release lever to 'A' post, fit nuts
and tighten to 10 Nm (7 lbf.ft).
Fit bonnet release cable grommet to the
bulkhead.
Connect bonnet release cable to the bonnet
lock.
M76 4573
3.
4.
5.
6.
7.
4.
Disconnect bonnet release cable from the front
panel retaining clip.
Align timing mark on bonnet release cable to
retaining clip and secure to the clip.
With assistance operate bonnet release lever
and check for the correct operation of the lock.
Fit bonnet lock shield and secure with rivets
Fit the front grille.
8.
9.
+
EXTERIOR FITTINGS, REPAIRS,
Grille - front - from 03MY.
REPAIRS 76-2-11
| Categories | Land Rover Defender, Land Rover Discovery II, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1999 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery Series II |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)