FRONT SUSPENSION
Refit
1.
Clean lower ball joint location and surrounding
area of axle yoke.
Apply a 12 mm (0.5 in) wide yellow paint stripe
on axle yoke, adjacent to lower ball joint
location.
Steering knuckle
$% 60.15.19
Remove
2.
1.
Remove wheel hub.
FRONT SUSPENSION, REPAIRS,
+
Wheel hub.
2.
Remove 3 bolts securing mudshield and
remove mudshield.
3.
4.
Fit tool LRT-54-022 to tool LRT-54-008 and
secure with screw.
Fit tool LRT-54-022 and tool LRT-54-008 to
lower ball joint location on axle yoke.
Fit new lower ball joint to tool LRT-54-008/14.
Fit LRT-54-008/14 and lower ball joint to LRT-
5.
6.
54-008, with lower ball joint positioned on axle
yoke.
7.
Align tool assembly and press lower ball joint
into axle yoke.
3. Remove 2 nuts securing track rod and (if
applicable) drag link to steering knuckle.
Break taper joints using LRT-57-036, then
position track rod and drag link aside.
CAUTION: Damage to the joint boot will
result if the tool is not correctly aligned
during the fitting procedure.
4.
8.
9.
Remove tools from axle yoke
Fit steering knuckle.
FRONT SUSPENSION, REPAIRS,
+
Steering knuckle.
60-30
REPAIRS
| Categories | Land Rover Defender, Land Rover Discovery II, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1999 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery Series II |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)