FRONT SUSPENSION
Refit
1.
Clean and lubricate bush and radius arm
mating faces.
10.
11.
Using LRT-60-011/1 and LRT-60-011/2 press
out bush from rear end of radius arm.
Using a suitable piece of tubing, press out
bushes from axle end of radius arm.
2.
3.
Using LRT-60-011/1,LRT-60-011/2 and LRT-
60-011/3,
press bush into rear end of radius
arm.
Using a suitable piece of tubing press front
radius arm bush into radius arm.
4.
5.
Repeat above operation for remaining bush.
Position radius arm to vehicle and fit securing
nuts and bolts, do not tighten at this stage.
CAUTION: Nuts and bolts must be tightened
with weight of vehicle on suspension.
6.
7.
Fit cable tie to secure axle breather.
Fit track rod to steering knuckle and secure with
nut, tighten to 125 Nm (92 lbf.ft).
Fit road wheel and tighten nuts to 140 Nm (103
lbf.ft).
8.
9.
10.
Remove stand(s) and lower vehicle.
Tighten radius arm nuts and bolts to 230 Nm
(170 lbf.ft).
60-38
REPAIRS
| Categories | Land Rover Defender, Land Rover Discovery II, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1999 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery Series II |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)