DOORS
Refit
Glass - front or rear door
$% 76.31.01
1. Fit glass to frame.
2.
Position frame to door and tighten bolts
securing front door frame to 10 Nm (7 lbf.ft) and
bolts securing rear door frame to 22 Nm (16
lbf.ft).
Remove
3.
4.
5.
Secure regulator to glass with bolts and tighten
to 6 Nm (4.4 lbf.ft).
Fit inner and outer waist seal and secure with
clips.
1.
Remove door trim casing.
DOORS, REPAIRS, Trim casing -
+
front door.
+
DOORS, REPAIRS, Trim casing -
Front door glass only: Fit exterior door mirror.
rear door.
+
EXTERIOR FITTINGS, REPAIRS,
2.
3.
Carefully release water shedder from door.
Front door glass only: Remove exterior door
mirror.
Mirror - exterior - electric.
Fit water shedder to door.
Fit door trim casing.
6.
7.
+
EXTERIOR FITTINGS, REPAIRS,
+
DOORS, REPAIRS, Trim casing -
Mirror - exterior - electric.
front door.
4.
Remove inner waist seal.
+
DOORS, REPAIRS, Trim casing -
rear door.
Front door shown, rear door similar
5.
Remove 2 clips securing ends of outer waist
seal.
6.
7.
Remove outer waist seal.
Remove 2 bolts securing glass to regulator. If
necessary, lower glass to access bolts.
Remove bolts securing frame to door.
Remove door frame complete with glass.
Slide out and remove glass from frame.
8.
9.
10.
REPAIRS
76-1-5
| Categories | Land Rover Defender, Land Rover Discovery II, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1999 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery Series II |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)