ENGINE - V8
Refit
Pump - oil
$% 12.60.26
Remove
1. Ensure filter head adaptor is clean.
2.
Fit filter head adaptor and tighten bolts to 13
Nm (9 lbf.ft).
3.
4.
Clean filter head and mating face.
Fit new 'O' rings to filter head and filter head
adaptor.
1.
Remove timing gear cover gasket.
ENGINE - V8, REPAIRS, Gasket -
+
5.
6.
Fit filter head and tighten bolts to 8 Nm (6 lbf.ft).
Ensure oil pressure switch and mating face is
clean.
timing gear cover.
7.
Fit new sealing washer and tighten switch to 15
Nm (11 lbf.ft).
8.
9.
Clean coolant pump and mating face.
Use a new gasket and fit coolant pump.
Tighten bolts securing coolant pump to 25 Nm
(19 lbf.ft).
10.
11.
12.
Ensure CMP sensor is clean and fit sensor to
cover.
Fit clamp to CMP sensor and tighten bolt to 8
Nm (6 lbf.ft).
Fit timing gear cover gasket.
+
ENGINE - V8, REPAIRS, Gasket -
timing gear cover.
2.
3.
4.
5.
6.
Remove bolt securing CMP sensor, remove
clamp and sensor.
Remove 6 bolts securing coolant pump,
remove pump and discard gasket.
Remove oil pressure switch and discard
sealing washer.
Remove 4 bolts securing oil filter head, remove
filter head and discard 2 'O' rings.
Remove filter head adaptor.
12-2-36
REPAIRS
| Categories | Land Rover Defender, Land Rover Discovery II, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1999 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery Series II |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)