PANEL REPAIRS
Repair
Headlamp mounting panel - RH
Remove
1.
Disconnect both battery leads, negative lead
first.
2.
3.
Disconnect leads/multiplug from alternator.
Remove front bumper assembly.
EXTERIOR FITTINGS, REPAIRS,
+
Bumper assembly - front.
4.
Models with A/C: Remove condensor.
AIR CONDITIONING, REPAIRS,
+
Condenser.
5.
6.
Diesel models: Remove gearbox fluid cooler.
Remove RH headlamp.
LIGHTING, REPAIRS, Headlamp - up
+
to 03MY.
7.
8.
Remove RH repeater lamp.
LIGHTING, REPAIRS, Lamp - front
repeater - up to 03MY.
Release headlamp levelling motor and position
aside.
+
9.
10.
Release headlamp wiring and position aside.
Remove battery and battery tray.
CHARGING AND STARTING,
+
REPAIRS, Battery.
11.
Remove horn.
ALARM SYSTEM AND HORN,
+
REPAIR, Vehicle horn.
Remove RH crush can.
Remove 2 bolts securing front bulkhead
assembly to chassis.
M77 1741A
12.
13.
1.
Remove existing panel(s), prepare panel joint
faces and install new panel(s) in accordance
with Panel Replacement Procedure. Punch or
drill holes in new panel for plug welding as
shown.
14.
Remove RH centre brace.
Refit
1.
Fit centre brace.
2.
Fit 2 bolts securing bulkhead to chassis and
tighten bolts to 45 Nm (33 lbf.ft).
Fit crush can.
3.
4.
5.
Models with A/C: Fit A/C pipes.
Fit horn.
+
ALARM SYSTEM AND HORN,
REPAIR, Vehicle horn.
Fit battery and battery tray. Do not connect
leads.
6.
+
CHARGING AND STARTING,
REPAIRS, Battery.
7.
8.
Fit headlamp wiring and headlamp levelling
motors.
Fit repeater lamp.
+
LIGHTING, REPAIRS, Lamp - front
repeater - up to 03MY.
REPAIRS 77-2-25
| Categories | Land Rover Defender, Land Rover Discovery II, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1999 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery Series II |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)