TRANSFER BOX - LT230SE
Solenoid - interlock - Up to 03 MY
Solenoid - interlock - from 03 MY
$% 41.20.63
$% 41.20.63
Remove
Remove
1.
Remove differential lock selector cable.
TRANSFER BOX - LT230SE,
+
REPAIRS, Cable - selector - differential lock.
2.
3.
4.
5.
Remove nut securing lever to selector housing
cross shaft and remove lever from shaft.
Release insert from solenoid multiplug, remove
wire terminals and remove multiplug body.
Remove sealant from solenoid and gear
selector housing.
Remove circlip securing solenoid to gear
selector housing and remove solenoid from
housing.
1.
2.
3.
Raise vehicle on ramp.
Disconnect multiplug from interlock solenoid.
Release multiplug retainer from mounting plate
on transfer box.
4.
5.
Remove 4 bolts securing solenoid cover,
remove cover and Belleville washer.
Remove solenoid.
Refit
1.
Fit solenoid to gear selector housing, feeding
harness through hole in housing.
Fit circlip to secure solenoid and apply STC
50551 to seal solenoid to housing.
Fit wires to multiplug body and fit insert into
multiplug.
2.
3.
4.
5.
Refit
1.
2.
Clean solenoid cover and mating face.
Position solenoid in main casing.
Apply sealant, Part No. STC 4600 to solenoid
cover
Fit cover and Belleville washer.
Fit bolts securing interlock solenoid and tighten
to 10 Nm (7 lbf.ft).
3.
Fit lever to cross shaft and tighten nut to 25 Nm
(18 lbf.ft).
4.
5.
Fit differential lock selector cable.
+
TRANSFER BOX - LT230SE,
REPAIRS, Cable - selector - differential lock.
6.
7.
Connect and secure multiplug.
Lower vehicle on ramp.
41-40
REPAIRS
| Categories | Land Rover Defender, Land Rover Discovery II, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1999 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery Series II |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)