PANEL REPAIRS
Repair
'A' post assembly
In this procedure, the front wing and the valance
outer reinforcement (rear section) are replaced in
conjunction with the 'A' post assembly. The dash side
assembly can also be replaced in this procedure if
required.
Remove
1.
Disconnect both battery leads, negative lead
first.
2.
3.
4.
Disconnect leads/multiplug from alternator.
Remove bonnet.
Remove front wing.
+
EXTERIOR FITTINGS, REPAIRS,
Wing - front - up to 03MY.
5.
Remove RH or LH front door.
DOORS, REPAIRS, Door - front.
+
6.
7.
Remove RH or LH sill finisher.
Remove windscreen.
+
SCREENS, REPAIRS, Windscreen.
8.
Diesel models: Remove ECM.
ENGINE MANAGEMENT SYSTEM -
+
Td5, REPAIRS, Engine control module
(ECM).
9.
Remove RH or LH 'A' post inner finishers and
disconnect speaker multiplug (if fitted).
Release sunroof drain tube and position aside.
Remove RH or LH front seat.
10.
11.
+
SEATS, REPAIRS, Seat - front.
12.
13.
14.
RH side: Remove CD autochanger.
IN CAR ENTERTAINMENT,
REPAIRS, CD autochanger.
+
M77 1751
Remove fascia.
+
INTERIOR TRIM COMPONENTS,
1. Remove existing panel(s), prepare panel joint
faces and install new panel(s) in accordance
with Panel Replacement Procedure. Punch or
drill holes in new panel for plug welding as
shown.
REPAIRS, Fascia.
Driver's side: Remove steering column
support bracket.
Remove relevant wiring from 'A' post.
Remove tread plate from front door aperture.
Release front carpet and position aside.
Remove front door aperture seal.
Remove engine bulkhead insulation.
15.
16.
17.
18.
19.
REPAIRS 77-2-35
| Categories | Land Rover Defender, Land Rover Discovery II, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1999 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery Series II |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)