TRANSFER BOX - LT230SE
23.
Position gearbox support jack and secure
support plate to jack using 4 bolts.
19.
20.
03 Model Year onwards - if fitted: Release
and disconnect both differential lock warning
lamp switch multiplugs from main harness.
Remove cable tie and multi plug from bracket
on transfer box.
24.
25.
Remove 3 bolts securing transfer box to
gearbox.
Fit 3 guide studs LRT-41-009 through
transfer box bolt holes to support it during
removal.
26.
Remove 2 bolts and nut securing transfer box
to gearbox.
21.
Release transfer box breather pipe from
bulkhead clip.
CAUTION: If securing stud is removed
during this operation, it must be discarded
and a new stud fitted.
27.
Position a jack to support gearbox and engine.
22.
Remove 4 bolts from transfer box bottom plate,
position support plate LRT-99-010 to transfer
box and tighten bolts.
REPAIRS
41-27
| Categories | Land Rover Defender, Land Rover Discovery II, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1999 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery Series II |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)