DOORS
Regulator and motor - front and rear
door glass
$% 76.31.45
Remove
1.
2.
Remove door trim casing.
DOORS, REPAIRS, Trim casing -
+
front door.
+
DOORS, REPAIRS, Trim casing -
rear door.
Carefully release water shedder from door.
9.
Remove 3 Torx screws securing glass lift
motor to regulator and remove motor.
Refit
1.
2.
Clean mating faces of regulator and motor.
Fit glass lift motor to regulator and tighten 3
Torx screws to 5 Nm (3.7 lbf.ft).
Position regulator in door. Fit bolts securing
regulator to door and tighten to 6 Nm (4.4
lbf.ft).
3.
4.
5.
Connect multiplug to glass lift motor.
Remove wedge holding glass and position
glass to regulator.
6.
Secure glass to regulator with bolts and tighten
to 6 Nm (4.4 lbf.ft).
7.
8.
Fit water shedder to door.
Fit door trim casing.
+
DOORS, REPAIRS, Trim casing -
front door.
+
DOORS, REPAIRS, Trim casing -
rear door.
3.
Lower glass and remove 2 bolts securing door
glass to regulator.
4.
5.
6.
Raise glass and secure with a suitable wedge.
Disconnect multiplug from glass lift motor.
Front door: Remove 6 bolts securing glass
regulator assembly to door.
7.
8.
Rear door: Remove 4 bolts securing glass
regulator assembly to door.
Manoeuvre regulator through access hole at
bottom of the door.
REPAIRS
76-1-7
| Categories | Land Rover Defender, Land Rover Discovery II, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1999 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery Series II |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)