EXTERIOR FITTINGS
Panel - underbelly
$% 76.10.50
Remove
Mirror - exterior - electric
$% 76.10.57
Remove
1.
Raise front of vehicle, support underbody and
lower front axle
WARNING: Do not work on or under a
vehicle supported only by a jack. Always
support the vehicle on safety stands.
1.
2.
3.
4.
5.
6.
Release cheater panel from front door.
Remove anti-rattle foam pad from front door.
Release mirror multiplug from mounting plate.
Disconnect multiplug from mirror.
Remove 3 bolts securing mirror to door.
Remove mirror and collect mounting plate.
2.
3.
Remove nut securing drag link to drop arm.
Using tool LRT-57-036 break taper joint and
release drag link from drop arm.
Remove nut and bolt securing steering damper
to chassis and remove damper.
Remove 7 screws securing underbelly panel.
Remove underbelly panel.
Remove 7 studs securing sound deadening to
underbelly panel.
Refit
1.
2.
Fit mirror and mounting plate to door.
Fit bolts securing mirror to door and tighten to
4 Nm (3 lbf.ft).
4.
3.
4.
5.
6.
Connect multiplug to mirror.
5.
6.
7.
Secure multiplug to mounting plate.
Fit anti-rattle foam pad to front door.
Secure cheater panel to front door.
8.
Remove sound deadening.
Refit
1.
Position sound deadening to underbelly panel
and secure with studs.
2.
3.
Fit underbelly panel and secure with screws.
Position steering damper, fit nut and bolt and
tighten to 125 Nm (92 lbf.ft)
4.
5.
Fit drag link to drop arm and tighten nut to 80
Nm (59 lbf.ft).
Lower front of vehicle.
REPAIRS
76-2-7
| Categories | Land Rover Defender, Land Rover Discovery II, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1999 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery Series II |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)