ENGINE - V8
6.
RH drive models: Remove brake servo heat
shield.
+
MANIFOLDS AND EXHAUST
SYSTEMS - V8, REPAIRS, Heat shield -
brake servo - Without Secondary Air
Injection.
10.
Models with SAI: Using a 9 mm hexagonal
drive bit, remove 2 air injection adapters from
cylinder head; discard adapters.
Note: To release the adapter thread locking
agent and prevent damage to the cylinder
head, remove the adapters by alternately
loosening then tightening slightly. Repeat this
procedure until adapters are removed.
7.
Remove 8 bolts securing exhaust manifold to
cylinder head, release manifold and collect 2
gaskets.
CAUTION: Do not use air tools to remove
adapters.
8.
9.
Progressively remove 4 bolts securing the
rocker shaft and remove rocker shaft.
Remove push rods. Store push rods in their
fitted order.
11.
12.
In the sequence shown, remove 10 bolts
securing the cylinder head to block. Discard the
bolts.
Remove cylinder head.
CAUTION: Support both ends of cylinder
head on blocks of wood.
REPAIRS 12-2-17
| Categories | Land Rover Defender, Land Rover Discovery II, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1999 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery Series II |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)