MANUAL GEARBOX - R380
10.
Invert output shaft in vice and fit 3rd gear,
bearing, baulk rings, 3rd / 4th synchroniser and
spacer.
11.
Remove output shaft from vice.
7.
Using tool LRT-37-001, LRT-37-044 and
LRT-99-002, press taper bearing onto output
shaft.
12.
Using tool LRT-99-002 and a suitable mandrel
press pilot bearing onto output shaft.
8.
Check end float of 1st gear using a feeler gauge
between gear and collar flange:
l New = 0.05 - 0.20 mm (0.002 - 0.008 in)
l Service limit = 0.327 mm (0.012 in)
13.
14.
Check end float of 3rd gear between gear and
flange on output shaft.
l New = 0.11 - 0.21 mm (0.004 - 0.0083 in)
l Service limit = 0.337 mm (0.013 in)
Fit gearbox selector fork set.
9.
Check end float of 2nd gear using a feeler
gauge between gear and output shaft flange:
l New = 0.04 - 0.21 mm (0.0016 - 0.0083 in)
l Service limit = 0.337 mm (0.013 in)
+
MANUAL GEARBOX - R380,
OVERHAUL, Fork - set - selector shaft.
OVERHAUL
37-33
| Categories | Land Rover Defender, Land Rover Discovery II, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1999 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery Series II |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)