MANIFOLDS AND EXHAUST SYSTEMS - V8
Tail pipe
$% 30.10.22
Remove
Heat shield - brake servo - Without
Secondary Air Injection
$% 30.10.48
1.
Raise vehicle on ramp.
Remove
1.
2.
Release fixings and remove battery cover.
Disconnect battery earth lead.
3.
Remove nut securing heat shield bracket to
valance.
2.
Remove 3 nuts securing intermediate pipe/
silencer to tail pipe.
3.
4.
Release and remove tail pipe from mounting.
Collect intermediate pipe/silencer to tail pipe
gasket.
Refit
1.
2.
Clean silencer and tail pipe mating faces.
Position tail pipe and secure on mounting.
Using a new gasket, align tail pipe to
intermediate pipe/silencer.
3.
4.
Remove 2 bolts securing heat shield and
remove heat shield.
4.
Fit nuts to intermediate pipe/silencer and
tighten to 25 Nm (18 lbf.ft).
Refit
1.
Fit heat shield, tightening bolts to 25 Nm (18
lbf.ft) and nut to 10 Nm (7 lbf.ft).
2.
3.
Connect battery earth lead.
Fit battery cover and secure with fixings.
REPAIRS
30-2-9
| Categories | Land Rover Defender, Land Rover Discovery II, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1999 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery Series II |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)