HEATING AND VENTILATION
5.
6.
Release clip securing control outer cable to
heater case and disconnect inner cable from
flap lever.
Remove control cable.
Refit
1.
Fit new control cable, connect inner cable to
control and secure abutment to control
housing.
2.
3.
Fit other end of inner cable to flap lever.
Position control to maximum heat for
temperature control cables or demist for air
flow control cable, hold flap lever in fully closed
position and secure outer cable in clip on
heater casing.
2.
3.
Passenger temperature control cable:
Remove 4 screws securing glove box, release
catch and remove glove box.
Remove louvre panel assembly.
4. Refit louvre panel assembly.
INTERIOR TRIM COMPONENTS,
+
INTERIOR TRIM COMPONENTS,
+
REPAIRS, Louvre panel assembly - centre
fascia.
REPAIRS, Louvre panel assembly - centre
fascia.
5.
6.
Driver temperature and air flow control
cables: Close fuse access cover and secure
fixings.
Passenger temperature control cable: Refit
glove box and secure with bolts.
4.
Release control cable abutment from control
housing and disconnect inner cable from
control.
80-16
REPAIRS
| Categories | Land Rover Defender, Land Rover Discovery II, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1999 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery Series II |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)