FRONT SUSPENSION
Refit
Pressure transducer - ACE
1. Ensure pressure transducer and port in valve
block is clean.
2.
Fit new 'O' ring to pressure transducer. Fit and
tighten pressure transducer to 20 Nm (15
lbf.ft).
$% 60.60.22
CAUTION: The ACE hydraulic system is
extremely sensitive to the ingress of dirt or
debris. The smallest amount could render the
system unserviceable. It is imperative that the
following precautions are taken.
3. Connect multiplug to pressure transducer.
4. Renew ACE high pressure filter.
FRONT SUSPENSION, REPAIRS,
Filter - high pressure - ACE.
5. Lower vehicle.
+
l
l
l
ACE components are thoroughly cleaned
externally before work commences;
all opened pipe and module ports are
capped immediately;
all fluid is stored in and administered
through clean containers.
Remove
1.
Raise vehicle on a ramp.
2.
3.
4.
Disconnect multiplug from transducer.
Position container to collect fluid spillage.
Remove pressure transducer and discard 'O'
ring.
CAUTION: Always fit plugs to open
connections to prevent contamination.
60-48
REPAIRS
| Categories | Land Rover Defender, Land Rover Discovery II, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1999 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery Series II |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)