SUNROOF
Refit
Motor - sunroof
$% 76.84.07
This procedure is applicable to the motor of both
sunroofs.
Remove
1.
Gain access to the sunroof motor:
l For front sunroof motor, remove front
stowage pocket.
+
INTERIOR TRIM COMPONENTS,
REPAIRS, Stowage pocket - front.
l For rear sunroof motor, remove headlining.
+
REPAIRS, Headlining.
CAUTION: The sunroof must be fully closed
before removing the sunroof motor.
INTERIOR TRIM COMPONENTS,
1.
2.
Check sunroof motor timing notch (A) aligns
with edge of microswitch (B). If motor is out of
alignment, rotate counting wheel (C) to correct
position using an Allen key.
Ensure sunroof drive cables are in fully closed
position.
3.
4.
Fit motor to sunroof frame.
Fit Torx screws securing motor to sunroof tray
and tighten to 2 Nm (1.5 lbf.ft).
Connect sunroof motor multiplug.
Fit interior trim:
5.
6.
l For front sunroof motor, fit front stowage
pocket.
+
INTERIOR TRIM COMPONENTS,
REPAIRS, Stowage pocket - front.
l For rear sunroof motor, fit headlining.
+
INTERIOR TRIM COMPONENTS,
REPAIRS, Headlining.
2.
3.
Disconnect sunroof motor multiplug.
Remove 3 Torx screws securing motor to
sunroof tray.
4.
Remove sunroof motor.
76-6-18
REPAIRS
| Categories | Land Rover Defender, Land Rover Discovery II, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1999 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery Series II |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)