1999 Land Rover Discovery Series II Workshop Manual

HARNESSES
Harness - main
$% 86.70.07
Remove
1.
Remove heater assembly.
HEATING AND VENTILATION,
+
REPAIRS, Heater assembly - models with
air conditioning.
+
HEATING AND VENTILATION,
REPAIRS, Heater assembly - models
without air conditioning.
21.
Disconnect multiplugs from A/C compressor,
turbocharger solenoid valve,  AAP sensor and
MAF sensor.
22.
23.
Release harness clips from coolant hose and
PAS hose.
Note the route of the engine harness, release
from underneath of inlet manifold  and remove
from engine.
Refit
1.
Position harness on engine.
2.
Connect multiplugs to A/C compressor,  
turbocharger solenoid valve, AAP and MAF  
sensors.
2.
Remove 4 clips securing LH and RH trim
panels to lower 'A' post.
Remove both lower 'A' post trim panels.
Remove air filter assembly.
+
3.
Position harness clips to coolant and PAS
hoses.
Connect multiplug to ECT sensor.
Position  harness to front of  cylinder head and
tighten bolts to 10 Nm  (7 lbf.ft).
Connect injector multiplug.
Connect multiplug and position battery  cable to
alternator and tighten nut.
Connect multiplug to fuel temperature  sensor.
Connect multiplug to MAP sensor.
Connect glow plugs.
Connect CKP sensor multiplug.
Connect Lucar to starter solenoid.
Connect  battery lead to starter solenoid and
tighten nut to 10 Nm  (7 lbf.ft).
Position harness clip to coolant pipe.
Locate harness over bell housing and  connect
multiplug to oil pressure switch.
Connect 2 multiplugs to EGR solenoids.
Connect engine harness multiplug to ECM  and
main harness.
3.
4.
4.
5.
ENGINE MANAGEMENT SYSTEM -
V8, REPAIRS, Air cleaner assembly.
Remove battery tray.
6.
7.
5.
6.
Remove front bumper.
+
EXTERIOR FITTINGS, REPAIRS,
8.
9.
10.
11.
12.
13.
Bumper assembly - front.
14.
15.
16.
17.
18.
19.
20.
Connect engine harness multiplugs to  fuse
box.
Position glow plug lead to fuse box and tighten
bolt to 3.5 Nm (2.6 lbf.ft).  
Position  battery and alternator  leads to fuse
box and tighten bolts to 6 Nm  (4.4 lbf.ft).
Fit engine compartment fuse box cover.
Fit battery carrier.
21.
22.
23.
Fit engine acoustic cover.
REPAIRS   86-7-15
Product Specification
CategoriesLand Rover Defender, Land Rover Discovery II, Range Rover
Tags
Model Year1999
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 1529 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDiscovery Series II
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field