PANEL REPAIRS
Repair
Valance upper assembly (front section) -
RH
In this procedure, the front wing and the valance
outer reinforcement (front section) are replaced in
conjunction with the RH valance upper assembly
(front section).
Remove
1.
Disconnect both battery leads, negative lead
first.
2.
3.
Disconnect leads/multiplug from alternator.
Remove front wing.
EXTERIOR FITTINGS, REPAIRS,
M77 1693A
+
Wing - front - up to 03MY.
+
EXTERIOR FITTINGS, REPAIRS,
Wing - front - from 03MY.
4.
Remove battery.
CHARGING AND STARTING,
+
REPAIRS, Battery.
Remove battery tray.
Remove fuse box.
Release expansion tank from fixings and
position aside.
5.
6.
7.
M77 1749
8.
Release harness from valance and position
aside.
1.
Remove existing panel(s), prepare panel joint
faces and install new panel(s) in accordance
with Panel Replacement Procedure. Punch or
drill holes in new panel for plug welding as
shown.
Refit
1.
2.
Fit harness to valance.
Fit and secure expansion tank to fixings.
Fit fuse box.
3.
4.
Fit battery tray.
5.
Fit battery.
CHARGING AND STARTING,
+
REPAIRS, Battery.
6.
Fit front wing.
EXTERIOR FITTINGS, REPAIRS,
+
Wing - front - up to 03MY.
+
EXTERIOR FITTINGS, REPAIRS,
Wing - front - from 03MY.
Connect leads/multiplug to alternator.
Connect battery leads, negative lead last.
7.
8.
77-2-32
REPAIRS
| Categories | Land Rover Defender, Land Rover Discovery II, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1999 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery Series II |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)